Road speed limit exceeded lets you know when a vehicle drives over the road's speed limit. Use it to spot speeding patterns over time and coach driving habits. It is off by default, so you need to turn it on in the FLEETA app or FLEETA Web Viewer.
Actual road signs always take priority over the speed limit shown in FLEETA.
What it does
- FLEETA compares your camera's location with the speed limit of the road you are driving on.
- When the vehicle goes more than 10 km/h (about 6 mph) over the road's speed limit for 12 seconds or longer, the event is recorded.
- You get a push notification, and the camera uploads a Live Event so you can see what happened.
Road speed limit exceeded is a FLEETA feature. It is different from the Speed alert setting on your dashcam, which uses a fixed speed limit that you set yourself.
What you need
- The FLEETA app or FLEETA Web Viewer. This feature is not available in the BlackVue app.
- A supported dashcam connected to the cloud. See "Supported models" below.
- Any FLEETA plan, including FLEETA Free. FLEETA Free allows 1 cloud camera. To use the feature on more than one vehicle, you need a paid plan.
- No new firmware is needed. Each supported model needs a minimum firmware version, listed below.
Supported models
| Model family | Supported model | Minimum firmware |
| DR750X Plus | DR750X Plus | v1.013 or later |
| DR750X LTE Plus | DR750X LTE Plus | v1.008 or later |
| DR900X Plus | DR900X Plus | v1.011 or later |
| DR750G Pro | DR750G Pro | v1.009 or later |
| B2B models | K970X Plus | v1.003 or later |
| K770X | v1.002 or later | |
| DR770X | DR770X (I and II) | v2.006 or later |
| DR770X-2CH IR / Truck / DMS / DMS II | v2.006 or later | |
| DR770X-2CH LTE / IR LTE / Truck LTE | v1.016 or later | |
| DR770X Box / Box Truck | v1.015 or later | |
| DR770X Box Pro | v1.010 or later | |
| DR770X Box-3CH Truck Pro / DMS Pro / DMS Truck Pro | v1.010 or later | |
| DR970X | DR970X | v1.014 or later |
| DR970X-2CH LTE | v1.015 or later | |
| DR970X Plus (I and II) | v2.008 or later | |
| DR970X-2CH LTE Plus (I and II) | v2.007 or later | |
| DR970X Box-2CH Plus / Box-2CH IR Plus | v1.010 or later | |
| ELITE | ELITE8 | v1.013 or later |
| ELITE9 | v1.010 or later | |
| ELITE10 | v1.009 or later | |
| ELITE10 Cabin | v1.000 or later | |
| Australia only | DR800 GOLD (800GOLD) | v1.009 or later |
| ELITE+GOLD | v1.010 or later |
Not supported: ELITE AIR, the DR590X series, and models that do not support cloud.
Supported countries
All roads: Australia, Austria, Bahrain, Belgium, Canada, Czechia, Denmark, Estonia, Finland, France, Germany, Hong Kong, Hungary, Indonesia, Ireland, Italy, Kuwait, Latvia, Lithuania, Macao, Malaysia, Netherlands, New Zealand, Norway, Oman, Poland, Portugal, Qatar, Romania, Russia, Saudi Arabia, Singapore, Slovakia, Spain, Sweden, Switzerland, Thailand, United Arab Emirates, United Kingdom, Vietnam.
Highways only: Japan, United States.
Even in supported countries, roads without speed limit information are not checked.
How to turn it on
Both settings are off by default. Turn on both, or you won't receive notifications.
- In the FLEETA app or FLEETA Web Viewer, go to Event Triggers and turn on Road speed limit exceeded.
- Go to Notification Settings > Push / Email Notifications and turn on Road speed limit exceeded.
Limitations
- No beep from the dashcam. This feature sends a push notification and uploads a Live Event. The camera does not beep.
- Only roads with speed limit data are checked. Roads without speed limit information are not checked.
- Road signs come first. Always follow the actual road signs, even if FLEETA shows a different limit.
- Not every speeding event is recorded. Only driving more than 10 km/h (about 6 mph) over the limit for 12 seconds or longer is recorded. The feature is designed to show speeding patterns over time, not to judge each single event.
Troubleshooting
I'm not getting speed limit alerts
Check the following in order:
- You are using the FLEETA app or FLEETA Web Viewer, not the BlackVue app.
- Both settings are on: Event Triggers and Push / Email Notifications.
- The camera is connected to the cloud while driving.
- Your model is on the supported models list. The firmware is at the minimum version listed for your model, or later.
- You are driving in a supported country. In the United States and Japan, only highways are covered. In other regions, all roads are covered. See "Supported countries" above.
- The road has speed limit data.
If everything above is in place and you still don't receive alerts, contact our support team. Please include your camera model, firmware version, country, and the date, time and location of the drive.
I sped, but nothing was recorded
An event is recorded only when the vehicle goes more than 10 km/h (about 6 mph) over the limit for 12 seconds or longer, and only on roads that have speed limit data.
The alert shows the wrong speed limit, or I wasn't speeding
The speed limit shown may not always match the road. Actual road signs always take priority.
Do I need a paid plan?
No. The feature works on any FLEETA plan, including FLEETA Free. FLEETA Free allows 1 cloud camera, so for more than one vehicle you need a paid plan.
Can I use it in the BlackVue app?
No. It is only available in the FLEETA app and FLEETA Web Viewer.
Can my dashcam beep when I go over the speed limit?
Not with this feature. Road speed limit exceeded sends a push notification and uploads a Live Event. Your dashcam's Speed alert setting is a separate feature that uses a fixed speed limit you set.
Can I use these records to discipline drivers?
We don't recommend it. A single record can be wrong. The feature is designed to show speeding patterns over time and help coach driving habits.