You can add a camera to the BlackVue app using one of the following three methods:
- Seamless Pairing (BT)
- QR Code Scan
- Manually (Wi-Fi)
Please refer to the step-by-step instructions below for each method.
Seamless Pairing (BT)
This is a simple registration method using your smartphone’s Bluetooth.
Supported models: All models
🔧 Steps
- Open the BlackVue app and tap the “+ Camera” button.
- Make sure your smartphone’s Bluetooth is enabled.
- Ensure that the dashcam is powered on and nearby.
- Select your camera from the Seamless Pairing (BT) list.
- Follow the on-screen instructions to verify the camera by placing your hand on the touch sensor.
- Once recognized, the camera will be automatically registered.
⚠️ some models are not supported: DR590W-1CH/2CH, DR590X-1CH/2CH, DR650GW-1CH/2CH, DR650S-1CH/2CH, DR750S-1CH/2CH, DR900S-1CH/2CH, DR590X Plus-1CH/2CH
QR Code Scan Method
This method allows you to register the camera by scanning the QR code printed on the camera packaging.
Supported models: ELITE and 590X Plus series
🔧 Steps
- Select “Add with QR Code”.
- Allow camera access when prompted (first-time users).
- Scan the QR code attached to the camera packaging box.
- Once recognized, the camera will be automatically registered.
✅ Note: The camera’s default settings may differ from your local time zone and language. You can change these in the Camera Settings menu.
Manual Registration (Wi-Fi)
This method allows you to manually register the camera by entering its Wi-Fi information.
Supported models: All models
🔧 Steps
- Select “Manually (Wi-Fi)”.
- On your smartphone, go to OS Settings > Wi-Fi Settings, tap the dashcam’s Wi-Fi SSID, and enter the password.
- Connect your smartphone to the camera’s Wi-Fi network.
- Once connected, the camera will be added to the app.
- Return to the app after reconnecting your phone to the internet (Wi-Fi).
✅ Note: The camera’s SSID and password are printed on the device itself or on its packaging box.
